How to Clean Your Anlin Window
To clean the outside of your window, dip a window scrubber or non-abrasive sponge into a bucket with a mixture of mild dish soap and water. Let any excess cleaning solution run off. Gently use the window scrubber or non-abrasive sponge to rub the cleaning solution over the entire surface of your window. Be careful not to saturate the glass with the cleaning solution. Use a squeegee to remove all the cleaning solution from the window. Starting from the top, squeegee from left to right. At the end of each stroke, wipe the squeegee's blade clean with a lint-free towel. Wipe off any cleaning solution on the frame with a microfiber towel. To clean the inside of your window, fill up a spray bottle with the same cleaning solution and spray the glass evenly. Use a microfiber towel to wipe your windows dry. Avoid washing glass in direct sunlight. Never use razor blades, abrasive pads, petroleum base cleaners, or caustic chemicals to clean your windows and doors. These items may cause permanent damage.
How to Clean Your Anlin Window Frame
When washing your window frame, use a mixture of mild dish soap and water along with a non-abrasive sponge. Squeeze or let the excess cleaning solution run off the sponge. Then use the sponge to wash the window frame. Use a damp towel to rinse off the frame completely. Wipe the frame dry with a microfiber towel. Do not use abrasive or caustic cleaners to clean your window or doors as these items can cause permanent damage to your products.
How to Clean Your Anlin Window Screen
To clean the screen, you will need to remove it from the window frame. Using both hands, pull the screen from the pull rail (or pull tabs) towards the center of the window, and then push the screen outward. Lay the screen on a flat clean surface. Dip a soft brush into a bucket with a mixture of mild dish soap and water. Gently scrub both sides of the screen with the cleaning solution. Rinse the screen using a hose with a spray nozzle set to a very light mist. Wipe the screen dry with a microfiber towel. When inserting the screen back into the frame, make sure to place the springs back into the screen channel. Pull towards the center, then pull the screen towards you to fasten the screen back into its intended position.